I just learned Linux recently. Refer to the instructional video and try to set the network card parameters using the ifconfig command, which is “ifconfig eth0 192.168.11.2”.
Eth0 :ERROR while getting interface flags:No such device. Screenshot below.
After a lot of searching on the Internet, someone suggested that maybe your network card name is not “eth0” but something else. So I entered a single line of code “ifconfig-a” to check all the network card parameters, only to find that my network card name is not “eth0”, but “eno16777736”. So the real statement to modify the nic parameters should be “ifconfig eno16777736 192.168.11.2”.
After that, I used the secureCRT remote login management tool and used “192.168.11.2” to login the virtual machine remotely!
Read More:
- A new virtual machine cannot be connected to the network (error fetching interface information device not found),
- Determining IP information for eth0… failed; no link present. Check cable?
- Ubuntu network configuration+Fixing “Failed to bring up eth0” in Ubuntu
- Tensorflow 2.1.0 error resolution: failed call to cuinit: CUDA_ ERROR_ NO_ DEVICE: no CUDA-capable device is detected
- Error:Connection activation Failed: no suitable device found for this connection solution
- device no response, device descriptor read/64, error -71
- no target device found problem solved
- “DNET: failed to open device eth1” error resolution of nmap
- [solved] DNET: failed to open device eth5
- Network card problem: Unable to initialize Windows Sockets interface
- Servlet error: no interface expected here
- /sbin/mount.vboxsf: mounting failed with the error: No such device
- Esp32 / 8266 uses arduinoota function to show no response from device
- tcpdump: no suitable device found
- Centos6 suddenly cannot access the network VM communication interface socket family: failed
- The solution of no space left on device always appears when using TF’s debug tool (tfdbg)
- -bash: cannot create temp file for here-document: No space left on device
- Resolved failed call to cuinit: CUDA_ ERROR_ NO_ DEVICE
- QInotifyFileSystemWatcherEngine::addPaths: inotify_add_Watch failed: there is no space on the device
- Solution summary of VMware network card without IP and failure to start network card (continuous update)