Problem description:
After creating an empty local Git repository, it is intended to Pull the code in the remote repository to the local exception. The specific exception contents are as follows:
git.exe pull –progress -v –no-rebase “origin” master
POST git-upload-pack (275 bytes)
remote: Counting objects: 7, done.
remote: Compressing objects: 100% (6/6), done.
warning: No common commits
remote: Total 7 (0) delta, reused 3 (delta 0), pack – reused 0
* From https://github.com/Jackson-AndyLau/CMSManager branch master – & gt; FETCH_HEAD
* [new branch] master -> origin/master
fatal: refusing to merge unrelated histories
git did not exit cleanly (exit code 128) (4469 ms @ 2018-07-01 11:13:35)
As shown in the figure below:
Solutions:
About this problem, the general solution and the core solution of the content encountered in the previous problem are the consistent “Git did not exit Cleanly (Exit Code 1) solution”.
1. According to the error prompt, we need to delete the git configuration file of the local repository to form an empty folder. Nothing in git folder should appear, and then “Git Clone” project from the remote repository directly, as shown in the figure below:
Empty folder:
2. Directly from the remote GitHub Clone project, it was found that the Clone succeeded, as shown in the figure below:
3. After remote Clone, the following figure appears:
Ok, this is the solution for Git did not exit Cleanly (Exit Code 1). If you have any questions or encounter any questions, please feel free to leave a message to me. I will answer them in detail.
xiehouyu: “learn together, progress together”, also hope that we pay more attention to the CSND IT community.
1. Syntax Error: “(” unexpected
Modify the Tools/Depends makefile.include to NDK_VER=0x9d
Reproduced in: https://www.cnblogs.com/weinyzhou/p/4983321.html
At The beginning of development, an exception like “The Remote Server returned an Error: NotFound.” was encountered.
The first time was because the service address was incorrectly filled in, that is, the wrong URI parameter was passed in when the EndpointAddress was created in Silverlight Application, and the exception disappeared when the correct modification was made.
But the exception was encountered again soon, and the address was found to be correct after checking. Also, the service method cannot be called correctly using the WcfTestClient tool. Therefore, the server was debugged, and it was found that abnormalities occurred in the running process of the server. The specific reason was that the Web.congfig of the server accidentally deleted the connectionString during re-editing, thus resulting in the exception of empty reference. But somehow, this error turns into a NotFound error on the client side?
Reproduced in: https://www.cnblogs.com/Gildor/archive/2009/12/17/1626059.html
Windows Update error 0x800703ED Possible solution
From: https://blessing.studio/fix-windows-update-error-0x800703ed/ thanks to original author.
HAIDOMO, here’s the year-end summary. It’s been two months in the making. The last post was posted last October by a pigeon blogger named DESU. In fact, the first post of 2018 was supposed to be the annual summary of 2017, but for various reasons, that post hasn’t been finished yet.
In recent days, I happened to encounter the situation of “Error 0x800703ED in Windows Update automatic Update” as mentioned in the title. After searching on the Internet for a long time, I finally found the root of the problem after a lot of pains. I hereby record it and hope to help others to come.
I don’t have much enthusiasm for the Windows Insider Perview anymore, but Fluent Design, which came out recently, looks great, and I’m going to upgrade to the latest Insider Preview in Windows Update. Despite the slow pace, the Build 17093 update was successfully checked and entered the “update in preparation” phase. Who ever wanted to get to 100% but got the following error:
error 0x800703ed screenshot
This is so fucking fuckin ‘.
0x02 is trying to locate the problem
. At the very beginning, I thought it was a network problem. I also tried to hang a global agent on the system and force all traffic to go off the agent at the router, and the result was 0x800703ed, so it could be basically excluded that it was a network problem.
Later, I searched Windows Update 0x800703ed on Google and saw many similar posts in The Microsoft Chinese community. The official replies were all the same, most of which were like this:
check whether Windows Update service is running normally
disable all other non-system services
check Update
recommended removal of various anti-virus software
upgrade Repair various drivers
system file damage, insert the installation CD to Repair
download various Repair tools……
I tried almost all the methods they mentioned and failed in the end.
There are also some search results on other Chinese communities, but they don’t help because they just let you:
Reinstall system
to this suggestion, I would also like to kindly reply: RSNDM.
Chinese content is not expected, and Then I searched the huge English language support community and other sites for a long time, finally found a possible reason for the problem:
Windows & AMP installed; Linux dual systems.
… .
sticker_288532_sorena
0x03 fix the problem
according to those sites (see the footer reference link), if you have a Windows/Linux boot on your machine and are using a different boot program (such as grub), you will get a 0x800703ed error when you perform an Update operation using Windows Update.
And Just as he said, I installed both Deepin Linux and Windows on the machine and handed gruB2 on the Linux partition to boot the dual boot.
Here you can basically solve the case. I then switched the boot program from Grub2 back to the huge hard NT 6.x, and after rebooting, Everything worked fine for Windows Update, which was successfully updated to Build 17093.
windows-update-error-fixed
I won’t go into the details of how to switch booters, but I’m going to go through a bunch of them on the web, just to distinguish between Legacy BIOS + MBR environment and UEFI + GPT environment.
Actually yesterday I return when the bootstrap switch point: like accidentally break hard disk with PE U disk MBR cause almost can’t get into any system, repair BCD always get wonderful question, meng for half an hour before detection is hard disk activity partition forget to come back, if it weren’t for yesterday, happen to have a Deepin live CD I have cool now, who let I can’t write grub2 configuration, see the grub rescue command line is the sheepare meng force).
0x04 postscript
as to why using a non-windows bootstrap would result in a 0x800703ed error at update time, I can only say I don’t know, who knows what I’m thinking. Maybe the big hard system update process needs to do some mysterious things with its own bootstrapper.
After Windows Update is complete, you can switch back to GRUb2 boot, complete with OJBK.
It should be noted, however, that while the solution mentioned in this article works for many users, including me, it may not work on your machine. After all, giant error reporting is just a self-written error code and never gives specific information. As I wrote in the title “Possible Solutions,” if the “switch bootstrapper” method doesn’t work for you who also encountered this error or caused any damage to your device, please don’t hit me over the wire, Crab.
Also preview, recently in addition to the year end summary, I should be writing yet another article about WSL (Windows Ims for Linux), stay tuned to cooing.
Reference link:
Windows 10 Update Error 0x800703ed – Dual Boot with Linux
Windows 10 upgrade fails with Error 0x800703ed
Cannot install Windows 10 Creator Update: “something went wrong” Error code 0x800703ed
perform
Yum-y install Ruby-devel and then install it
Mule Studio startup Error: Java.io.IOException: Cannot Run program “E:\2000\Java\JDKUpdate\bin\ Javaw.exe “(in directory “E:\BCS_SLN\BCS\DeveloperSource\ Congou-Runtium-ESB “): CreateProcess error = 206, ļ I lay down Au » o չ Au
Native environment: Chinese version of Windows 8 Enterprise X64, Java JDK version 1.6.0.35, Mule Studio 3.2.1 CE (integrated with Eclipse 3.6 Sp1)
I began to suspect that Mule environment had made a mistake and took the following measures:
1, delete.Mule folder, delete. Metadata folder, rebuild workspace, all invalid.
2. Delete THE JDK and reinstall it, restart the machine, and the failure remains the same.
3. Delete THE JDK and reinstall the 64-bit JDK, restart the machine, and the failure remains the same.
4. Modified Mule Studio workspace encoding to UTF-8,GBK,ISO-8859-1, and the error remains the same.
Google, see an article that says: “CreateProcess error=206, The filename or extension is too long.” That’s what the code meant. My God!
In this article
http://support.microsoft.com/kb/830473/en-us
“There is a limit to the length of a string supported on the Windows command line,” the article says. “On a computer running Microsoft Windows XP or later, the maximum length of a string that can be used at the command prompt is 8,191 characters. On a computer running Microsoft Windows 2000 or Windows NT 4.0, the maximum length of a string that can be used at a command prompt is 2047 characters.
Solution:
(1) Use shorter names for folders and files.
(2) Reduce the depth of folder trees.
(3) Store files in quantities so that fewer folders are required in the PATH environment Variable.
(4) Investigate possible methods that you can use to reduce the dependency of PATH for locating. DLL files
In other words, under Windows, the shell directive’s length limit results in the parameter string following JAVAW (in this case,
with the prefix E:\BCS_SLN\BCS\DeveloperSource\mule\congou- rung-esb loading each JAR) having a total length of more than 8191, resulting in truncation, reported above error.
Someone wrote example verification, http://www.cnblogs.com/aigongsi/archive/2012/04/11/2442774.html
Therefore, the path of modification project is E:\ Mule \ Congou – Runtime-ESB, and the problem is solved!
Note: The copyright of this article is jointly owned by Yueyue and CSDN. Please indicate the source for reprinting.
helping others equals self-help! 3 [email protected]
The error I was getting was as follows:
———————–
Problem Description
Why do I get license manager error-103?
License Manager error-103
Terminal Server remote client not allowed
Solution:
Contrary to the Error message text, this Error may be the result of changing u
sernames using the Sw Itch User feature in Windows xp. This feature can be enab
led on Windows XP computers that are not connected to a domain. It allows User
s to switch usernames without logging out or closing appl Tides.
If a user logs in under one username, MATLAB, and switches to another us
ername without closing MATLAB, they will receive license manager error-103 After usernames does not resolve the problem.
common, switching usernames to the original username does not resolve the I
ssue. The only way to resolve this issue is to do a clean Reboot of the system
nwindows xp.
This error also occurs on systems using Terminal Services, which is unsupporte
d in This release of matlab. There are no current plans to provide support for
Wind Ows Terminal Services. For more information please see:
What errors will I receive if I run MATLAB on a Windows Terminal Server?http://www.mathworks.com/support/solutions/data/26440.shtml
— — — — — — — — — — — — — — — — — — — — — — — — — –
As described in the overview, the problem may be due to multi-user switching or “Windows Terminal Server” (such as remote service?). As a result, there should be no need to reinstall or system restore. Remote let the computer restart, login again or not open Matlab, the error message still exists. Consider the question of remote login. Because the remote login was used to use Matlab, Matlab was opened before the login, rather than after the remote login, which may be the reason why there was no error before and now there is an error. On the Internet to see someone said, “use remote desktop login to the server using Matlab, in the remote host must have a local user login. This is a FLEXlm bug, “which, it seems, is probably due to the remote.
Next test step: log in the computer locally and open Matlab to see if there is an error message.
Results: After opening Matlab on the local machine, there was no prompt message again, and the problem was solved.
[conclusion]
Matlab this error message, usually caused by remote login. The reason is probably a bug in FLEXlm. Any software that USES FLEXlm must have a local user login when it is opened, otherwise the remote login will be wrong. The same error can occur with Ansys, Solidworks, Proe, and some EDA software. Therefore, if you want to use the software on the remote computer, you must first open the program on the remote computer, or you may run into this problem if you open it directly from the remote desktop.
Error message
No package nginx available
Error:Nothing to do
solution:
method one,
replacement source
backup
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
CentOS 7
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
Run Yum Makecache to generate the cache
Method 2:
use EPEL to install nginx:
sudo yum install epel-release
yum update
yum install nginx