Tag Archives: internet

How to Perfectly Uninstall ZoneAlarm Free Firewall

ZoneAlarm Free Firewall includes most of the common functions available in modern internet security programs. However, sometimes for some reason, the program may not meet your expectation and you just need to remove ZoneAlarm Free Firewall.
When you want to uninstall ZoneAlarm Free Firewall, the most common used tool which pops up in your mind comes to the Add/ Remove programs on Control Panel. But you should keep in mind that by this method, you can’t completely delete all the useless registry entries, related files and traces left by previously removed program. 
Rogueware infection?Click here.
What’s the harm for a failed ZoneAlarm Free Firewall removal?
1. The leftover of ZoneAlarm Free Firewall will take up valuable disk space and slow down your PC.
2. Mass traces left over by an incomplete ZoneAlarm Free Firewall removal can stuff Windows registry.
3. A failed uninstall by manual or other unsure uninstall tool may cause blue screen or system crash.
In this case, you may be trapped in various troubles from then on, such as computer freezing, runtime errors, system looping and so on.
So what is the best and safest way to uninstall ZoneAlarm Free Firewall?You can get multiple solutions by searching on the Internet; there are various tutorials, instructions and the introduction of all kinds of uninstallers and so on. However, sometimes, they don’t really work as they claim.
Among so many uninstallers, there is an uninstall tool is highly recommended by many computer experts and common PC users. Why can it stand out in a large group of uninstallers advertised on the internet?To clear it out, please have a look atthe benefits uninstall tool provides:
1. Much faster and more reliable than standard Windows Add/Remove programs.
2. Easily remove any stubborn programs that Windows Add/Remove Program can’t remove.
3. Completely remove ZoneAlarm Free Firewall and any other unwanted programs.
4. Forcibly uninstall applications that are even corrupted, and half-installed/uninstalled.
5. Clear registry entries and drivers that the programs leave over.
6. Show detailed information of a certain program installed in your computer.
7. Easy tpo use and effective with its unique features.
8. Is it amazing?Can’t wait to have a try? And do you want to completely uninstall ZoneAlarm Free Firewall immediately?
Download this uninstall tool here at to help you fully remove ZoneAlarm Free Firewall with great success and make sure all the now-defunct Registry entries and related files are eliminated automatically with a few clicks. Aside from this software, it can also completely remove other programs like Authentium, Norton, Trend Micro antivirus, Internet Explorer, Microsoft Office, and similar programs. Clickhere for video guide.

Http Error 12057 (Bug Fix Note)

A Bug has been reported in the product that only occurs for a specific platform, Windows Server 2003 Standard Edition.
Check the Trace Log and find that the wrapper class of Wininet call returns Error 12057, with the specific Error contents as follows:

ERROR_WINHTTP_SECURE_CERT_REV_FAILED

12057

Indicates that revocation cannot be checked because the revocation server was offline (equivalent to CRYPT_E_REVOCATION_OFFLINE).
Open the
IE-> Tools-> Internet Options-> Advanced Tab-> Security Options – & gt;” Check for server certificate revocation(Requires Restart) “

This option is currently selected. Remove this option and the Bug symptoms disappear. Only IE with Windows Server 2003 Standard Edition is checked by default, and Error 12057 (Microsoft’s Bug?) does not occur when this option is checked on other platforms. or with other options?) . Decided to code the problem.
The code to solve this problem is quite simple. Add the following code after HttpOpenRequest to set the current Http connection options to cancel this check
DWORD dwFlags = 0;

DWORD dwError = 0;

DWORD dwBuffLen = sizeof(dwFlags);
InternetQueryOption(m_hRequest, INTERNET_OPTION_SECURITY_FLAGS,

(LPVOID)& dwFlags, & dwBuffLen);

dwFlags |= SECURITY_FLAG_IGNORE_REVOCATION;

InternetSetOption(m_hRequest, INTERNET_OPTION_SECURITY_FLAGS, (LPVOID)& dwFlags, sizeof(dwFlags)) ;

Error 711: Cannot load Remote Access Service Connection Manager.

When you try to create a new network Connection, you may receive the following Error message:
Error 711: Cannot load Remote Access Service Connection Manager.
The Routing and Remote Access service terminated with service-specific error 711 (0x2C7)
Incoming Connections depend on the Routing and Remote Access service which was unable to start.For more information, check the system event log.
The first method:
 
Please take a look at your following services:
Service name: EventLog Display name: Windows Event Log Boot type: Auto
Service Name :TapiSrv Display name: Telephony Startup Type: Manual
Secure Socket Tunneling Protocol Service Startup Type: Manual
Service name :Netman Display name: Network Connections Startup Type: Manual
Service Name: NSI Display name: Network Store Inte*** CE Service Startup Type: Automatic
Service name :RasMan Display name: Remote Access Connection Manager Startup Type: Manual

error :711 friends, I think your service Settings should be on the first service I listed
First service description: This service manages events and event logs. It supports logging events, querying events, subscribing to events, archiving event logs, and managing event metadata. It displays events in BOTH XML and plain text formats. Stopping the service may compromise the security and reliability of the system.
Disabling the first Service will cause the SstpSvc to display the name: Secure Socket Tunneling Protocol Service which stops automatically after startup
And the service name :RasMan shows the name: Remote Access Connection Manager and the service needs to rely on it,
 
 

the second method:

this problem is easy to solve! At the command line run as administrator. Type Netsh WinSock Reset Enter and restart
 
 

the third method:

find C:/Windows/System32/LogFiles/WMI this folder, as long as this folder administrator title and then restart! Use rubik’s cube in the system Settings right menu management inside the new “access to administrator rights” function, and then you can click the right mouse button on the folder above, the administrator to obtain the ownership can be solved.
 

the fourth way :(this method did not try, it must work, but do not want to shut down every time to execute, feel like trying to steal the bell.

see by the members asked — — — — — — — the C:/Windows/System32/LogFiles/WMI right to this folder.
after restart, can be normal broadband connection. Then restart is such a problem, had to go to get the administrator rights of that file again, so after the restart can be on
The old restart is really very annoying, tell you a soil method, although soil, but it is really convenient, do not have to always take permission, restart. It’s the same thing, just write a script and have it run automatically when it’s turned off. Method is as follows:
1, to save the code below. Bat format (name myself to marry a good, I set it to 711. The bat) where is not easy to remove, code for @ ECHO OFF
takeown/f “C:/Windows/System32/LogFiles/WMI” y/r/d & amp; & icacls “C:/Windows/System32/LogFiles/WMI” /grant administrators:F /t
Encourage people to do it themselves, to enrich their food and clothing. The lazy ones or the ones that won’t save can be downloaded for a few bucks and the attachments below are already written

2, click “start” and “run”, in the run command box input “gpedit.msc”, open the group policy window pane on the left side of the console tree, in turn, a “computer configuration” “Windows Settings” “script startup/shutdown” node as shown in figure, double-click the details pane on the right side of the “shutdown” project, in the “shutdown properties” dialog box, click on the “add” button, will 711. Add bat for the new computer shutdown scripts set up complete, exit the group policy window, restart the computer
 
 
Fifth:
After the completion of the installation of Windows7, found that the dial-up connection can not be set up, either 711 error, 1068 dependent service can not start, or 691 error, and so on, it can be said that the error messages are varied!
There is no way, had to install back to WindowsXP, and then search the Internet for reasons, only to find that there are many friends appear the same error, after the search and analysis of the online information, as well as download ready to use the software, again installed back to Windows7.
Try to use the information on the Internet to solve the problem, make late at night, found still wrong, unable to restart to see first, no sleep, ready to install WindowsXp again the next day, a restart, surprise, to be able to connect to the Internet, web pages can be opened normally, success!
It’s two o ‘clock in the night. I’m going to bed

through several hours of groping, successfully dial-up Internet!
now put possible solutions, write out to share, may not be able to solve all the friends of the problem, but can try!
1,
install Windows7, then open control panel open network and Internet open view network status and tasks, select set up new connection or network, according to your network type set up the connection, set up the same method as WindowsXp.
 

“computer — management — services and applications — services”, go to the “Remote Access Connection Manager”, and check whether the “boot type” is “automatic”, if not, change to “automatic”. Similarly, find “Internet Connection Sharing (ICS)” and set it to “Auto.” Download ratio
Three,

find “c:/Windows/system32/logfiles” this folder and open.
Select and right-click the “WMI” folder. Select Get Administrator Privileges.

restart the computer!

5,
click on the lower right corner “”,

click the “broadband connection” and “” buttons. Icon “” becomes” “, OK!
open the network and share center, use the netcom broadband conversion tool to convert the user name, copy and paste, enter the password is ok. It’s ok to change the computer name. Right – click computer. Click properties. Click on advanced System Settings. Click computer name again. Click Change. Reset the top computer name in English or letters. Restart your computer. Log in and reconnect.
 
 
 

above five (except for the fourth) can not completely solve the “711 problem”, not necessarily which restart after the error.

here to do a survey, after all, recently there are many friends with this problem, everyone say
Because of what reason does oneself appear this problem?Is this the new system?Or after changing something?)
Is there a radical solution??(except for reinstall and system restore)
Hope to be able to solve this problem thoroughly through this post for the friends who are worried about this problem!

res://ieframe.dll/acr_ error.htm Error resolution | IE8 website restore error real feasible solution

Ie8 website restore error real feasible solution, this morning to open the computer, prompted to update the system patch, so the recommended three most important patches installed. On QQ, open the IE8 browser page of QQ space and suddenly switch quickly, and then the website restore error immediately appears, url header res:// IEframe. DLL /acr_error. HTM, after testing QQ space and other interactive websites will appear this problem.

use IE repair, but still not, looked up on the Internet there is no solution, only to see an article that reinstall IE8 can solve this problem. But since it’s a reinstallation of IE, I don’t think this is the solution. At first glance, I suspect the problem was caused by the morning update patch, and the most likely patch is JSON interoperability of Internet Explorer 8.
The real solution to the IE8 web restoration error is to check out the patch on Microsoft’s website: Install this update to improve JSON interoperability with Internet Explorer 8 according to the new ECMAScript (5th edition standard). You may have to restart your computer after installing this update.

solution: remove the JSON interoperability patch for Internet Explorer 8, the patch number KB976662. First go to the control panel – Add/remove program – display update – find the number KB976662 – delete.

ie8 website restore error really feasible solution, delete need to restart, after the test QQ space and other interactive website open normal. Above method is original, in WIN2003+IE8 under the test is feasible.

Solution to Starting Fault of routing and remote access service (16389 (0x4005))

1. The routing and remote access service cannot be started on a Microsoft Windows 2000 Server computer or a Microsoft Windows Server 2003 Server computer.
the following error message was recorded in the system event log on the Windows 2000 server computer:

Type error:

source: service control manager

category: none

event ID 7024:

note:

routing and remote access service due to a specific service error 87 (0x57).

Type error:

source: remote access

category: none

event ID: 20152

note:

the current configuration authentication provider failed to load and initialize. The parameter is an error.

The following error messages will be logged based on the system event log on the Windows Server 2003 machine:

Type error:

source: service control manager

category: none

event ID 7024:

note:

routing and remote access service due to a specific service error 16389 (0x4005).

 

Launching Routing and Remote Access Service prompts:
Routing and Remote Access cannot be started on a local computer. Refer to the system log for reasons. If this is not a Microsoft service, contact the service vendor. And refer to the specific error code 16389.
 
The details in the event viewer are:
Routing and Remote Access service to be stopped due to a 16389 (0x4005) service error. The error ID is 7024…
 
2, the reason
This problem occurred when the Internet Authentication Service (IAS) database was corrupted. IAS and routing and remote Access services use the IAS database.
 
3. Solutions
To solve this problem, follow these steps:

    extract ias.mdb file and dnary.mdb file from Windows2000Server CD or Windows Server 2003 CD to %WinDir%/System32/Ias folder on disk. To do this, follow these steps:

      click start, click run, type CMD in open, box, and then click ok. At the command prompt, type the following line. Press Enter after each line:

      Drive:
      cd i386
      ren %windir%/system32/ias/ias.mdb %windir%/system32/ias/iasOLD.mdb
      ren %windir%/system32/ias/dnary.mdb %windir%/system32/ias/dnaryOLD.mdb
      expand ias.md_ %windir%/system32/ias/ias.mdb
      expand dnary.md_ %windir%/system32/ias/dnary.mdb
      note that in this step, driver is a dvd-rom drive containing the Windows2000Server or WindowsServer2003CD that represents the drive letter is a cd-rom drive or placeholder.

    register oledb32r.dll file and register oledb32.dll file. To do this, follow these steps:

      at the command prompt, type the following line. Press Enter after each line:

      Drive:
      cd program files/common files/system/ole db
      regsvr32 oledb32r.dll
      note that in this step, drive is a placeholder representing the ProgramFiles folder is the drive letter to store. When you receive a message indicating whether the operation was successful, click OK. At the command prompt, type the following line, and then press ENTER:

      regsvr32 oledb32.dll
      When you receive a message indicating whether the operation was successful, click OK. Type EXIT and then press ENTER to exit the command prompt.

    register vbscript.dll file. To do this, follow these steps:

      at the command prompt, type the following line. Press Enter after each line:

      Drive:
      cd %systemroot%/system32
      regsvr32 vbscript.dll
      note that in this step, driver is a placeholder representing the drive letter is stored in the System 32 folder. When you receive a message indicating whether the operation was successful, click OK. Type EXIT and then press ENTER to exit the command prompt.

    starts routing and remote access services. To do this, follow these steps:

      points to the program, points to the management tool, and starts with Services. Right-click the Routing and Remote Access service, and click Start.

 

HTTP Error 401.1 – Unauthorized:Access is denied due to invalid credentials

Phenomenon: The site is set as AD integrated authentication, but when accessing it, it is still prompted to enter the account password. An error occurred three times later.
Solution: in C: \ Inetpub \ Adminscripts run below: cscript adsutil. VBS set w3svc/NTAuthenticationProviders “NTLM” modify the authentication mechanism.
 
The text reads as follows:
http://support.microsoft.com/kb/871179
 
 
Ok when trying to Access a site that’s part of the IIS6.0 application pool, you get an Error message: “HTTP Error 401.1 – Access is denied due to Invalidcredentials” (HTTP Error 401.1 – Unauthorized:Access denied due to Invalidcredentials)
See the products this article applies to
Expand all | close all
symptoms
When you try to access a Microsoft Internet Information Service (IIS) 6.0 site configured to use only integrated Windows authentication, you are prompted for user credentials. .
When you try to access a Microsoft Internet Information Service (IIS) 6.0 site configured to use only integrated Windows authentication, you are prompted for user credentials. When you try to log in, you will receive another login prompt. After three login attempts, you receive the following error message:
HTTP error 401.1 – unauthorized: Access denied due to invalid credentials.
Back to the top
why
This problem can occur if an IIS 6.0 web site is part of an IIS application pool. The application pool runs under either a local account or a domain user account. The site is configured to use only integrated Win…
This problem can occur if:
· The IIS 6.0 site is part of the IIS application pool.
· Application pools run under local accounts or domain user accounts.
· The site is configured to use only integrated Windows authentication.
In this case, Kerberos authentication may not work when an integrated Windows authentication attempt is made to use Kerberos. To use Kerberos authentication, the service must register the service principal name (SPN) of the service under the account in the Active Directory Directory service (the account used to run the service). By default, Active Directory registers the computer name of the network’s basic input/output system (NetBIOS). Active Directory also allows the use of Kerberos for network services or local system accounts.
Back to the top
The solution
If this problem occurs while running the application pool under a local account, follow the steps in the Alternative Methods section. To resolve this problem when running the application pool under a domain user account, use the NetBIOS name and…
If this problem occurs while running the application pool under a local account, follow the steps in the Alternative Methods section. To resolve this problem when running the application pool under a domain user account, set the HTTP SPN using the NetBIOS name and the fully qualified domain name (FQDN) of the domain user account used to run the application pool. To do this, follow these steps on the domain controller:

important note: the service SPN can only be associated with one account. Therefore, if you use this suggested solution, any other application pool running under different domain user accounts cannot be used solely with integrated Windows authentication.
1. Install the setspn. exe tool. To obtain the Microsoft Windows 2000 version of this tool, visit the following Microsoft web site:
http://www.microsoft.com/downloads/details.aspx?FamilyID=5fd831fd-ab77-46a3-9cfe-ff01d29e5c46& displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=5fd831fd-ab77-46a3-9cfe-ff01d29e5c46& displaylang=en)
Microsoft WindowsServer 2003 version of the setspn. exe command line tool is provided in WindowsServer 2003 SupportTools (WindowsServer 2003 SupportTools) included on WindowsServer 2003 CD. To install these Tools, double-click the Suptools.msi file in the Support/Tools folder.
2. Open a command prompt window and change to setspn.exe’s installation directory.
At the command prompt, type the following command. After typing each command, press Enter:
setspn.exe -a http/IIS_computer’s_NetBIOS_nameDomainName\UserName

setspn.exe -a http/IIS_computer’s_FQDN DomainName\UserName
Note: UserName is the user account used to run the application pool.
After setting the SPN of the HTTP service to the domain user account used to run the application pool, you can successfully connect to the web site without prompting you for user credentials.
Back to the top
Alternative methods
In cases where you have multiple pools of applications running under different domain user accounts, IIS must be forced to use NTLM as an authentication mechanism to resolve this issue (if you want to use only integrated Windows…
In cases where you have multiple pools of applications running under different domain user accounts, IIS must be forced to use NTLM as an authentication mechanism (if you want to use only integrated Windows authentication) to resolve this issue. To do this, follow these steps on the server where IIS is running:
1. Open a command prompt window.
2. Locate and change the directory containing adsutil.vbs file. By default, this directory is C:\Inetpub\Adminscripts.
3. Type the following command, then press Enter:
cscript adsutil.vbs set w3svc/NTAuthenticationProviders”NTLM”
4. To verify NtAuthenticationProviders metadata attribute is set to NTLM, please type the following command, and then press Enter:
cscript adsutil.vbs get w3svc/NTAuthenticationProviders
The following text should be returned:

NTAuthenticationProviders       : (STRING) "NTLM"

Back to the top
state
This behavior is caused by design.
This behavior is caused by design.
Back to the top
For more information
If you set the SPN using only the FQDN of the server on which IIS is running, you will be prompted for user credentials after 30 minutes. Because Internet Explorer caches the domain name system…
If you set the SPN using only the FQDN of the server on which IIS is running, you will be prompted for user credentials after 30 minutes. There is a 30-minute timeout due to the way Internet Explorer caches domain name system (DNS) information. After 30 minutes, Internet Explorer will revert to the NetBIOS name. Therefore, you must also ensure that the SPN is registered using the NetBIOS name of the server on which IIS is running, so that you are not prompted for user credentials. For more information, click the article number below to view the corresponding article in the Microsoft Knowledge base:
Internet Explorer 263558 (http://support.microsoft.com/kb/263558/) how to use the cache of DNS host item
To verify the registered SPN for the user account used to run the application pool, open a command prompt window, type the following command from the setspn.exe installation directory, and then press Enter:
setspn.exe -l UserName
A list of registered SPNS for the user account is returned.

“Securityerror: error ා 2060: Security sandbox conflict: external interface caller XXX cannot access XXX”

Today, I updated my Flash Player plugin to version 10.0.42.34. Then it turns out that a DVF that was previously running locally is running today and throwing an exception. The prompt message is as follows:
SecurityError: Error # 2060: security sandbox conflict: the ExternalInterface caller file://D:/study/flex/service/bin/rainbowX.swf file://D:/study/flex/service/bin/rainbowX_Debug.html can be accessed.
at flash.external::ExternalInterface$/_initJS()
at flash.external::ExternalInterface$/addCallback()
at freeidea.rainbowX::Application()
According to the prompt of debugging information because calls the ExternalInterface. AddCallback method. I take a look at the help documentation, which describes how this method throws a security exception as follows:
trigger

Error — this container does not support incoming calls. Incoming calls are supported only in Internet Explorer for Windows and browsers that use the NPRuntime API, such as Mozilla 1.7.5 and later or Firefox 1.0 and later.
0 SecurityError 1 — ActionScript in the sandbox where you have no access has added a callback with the specified name; You cannot override the callback. To solve this problem, rewrite the ActionScript that originally called the addCallback() so that it also calls the security.allowdomain () .

SecurityError - contains the environment belongs to the calling code has no right to access security sandbox. To solve this problem, follow these steps:

    in the HTML page containing the SWF file, set the following parameters in the object tag of the file: < param name="" value="always" /> in the SWF file, add the following ActionScript: flash. System. Security. AllowDomain (sourceDomain)
    Looking at the help instructions above, I think it may be due to cross-domain access issues, as mentioned in the article author (Developer) Control that if SWF wants to communicate with HTML scripts, then the value of allowScriptAccess for the plug-in must be set to Always. And SWF to allow access to the domain. So I try to join in the SWF flash system. Security. AllowDomain (" * "); Then add < < < param name="allowScriptAccess" value="always" /> This sentence.
    but the problem is still unresolved. There's no other way to think about it. Later, I found that my DVF could be browsed in the output folder of Project (I built it with Flex), but once I moved to another directory, it was not ok. As a result, I looked up the data and saw the following article, which was called "Overview of Permission Control". This article mainly shows what the Flash Player security model looks like. Below I put up part of the content, interested friends can go to the Internet search.
    overview of permission control
    Flash Player client runtime security model is a model designed around object resources such as SWF files, local data, and Internet urls. "Resource holders" means the parties that own or use these resources. Resource holders have control over their own resources (security Settings), and each resource has four holders. Flash Player USES a strict hierarchy of rights for these controls, as shown in the figure below:


    security control hierarchy


    the figure shows that if an administrator restricts access to a resource, no other holder can override the restriction.
    administrative user control
    The administrative user of the computer (the user logging in with administrative privileges) can apply Flash Player security Settings that affect all users of the computer. In a non-enterprise environment, such as a home computer, there is usually only one user, who also has administrative access. Even in an enterprise environment, a single user can have computer administration rights.
    There are two types of administrative user control:
    MMS. CFG file "global Flash Player trust" directory
    MMS. CFG file
    on Mac OS X, the MMS. CFG file is located in /Library/Application Support/Macromedia. On Microsoft Windows system, the file is located in the system directory of the Macromedia Flash Player folder (for example, in the default install Windows XP to C:/Windows/system32/macromed/Flash/MMS CFG).
    Flash Player will read its security Settings from this file when it starts, and then use these Settings to restrict the functionality.
    The MMS. CFG file includes Settings that the administrator USES to perform the following tasks:
    data loading - restricts reading of local SWF files, prohibits file downloading and uploading, and sets storage limits on permanent Shared objects. privacy controls - disable microphone and camera access, prohibit SWF files from playing windowless content, and prohibit SWF files from accessing permanently Shared objects in domains that do not match the URL displayed in the browser window. Flash Player updates - sets the time interval to check Flash Player updates, specifies the URL to use to check Flash Player updates, specifies the URL from which to download Flash Player updates, and completely disables automatic Flash Player updates. older file support - specifies whether earlier versions of SWF files should be placed in a trusted local sandbox. local file security - specifies whether a local file can be placed in a trusted local sandbox. full screen mode - disable full screen mode.
    SWF file can be by calling the "Capabilities. AvHardwareDisable and " Capabilities. LocalFileReadDisable property to access functionality disabled some of the information. However, most of the Settings in the MMS.cfg file cannot be queried through ActionScript.
    is to enforce application-independent security and privacy policies on the computer, and only the mms.cfg file can be modified by the system administrator. The MMS. CFG file cannot be used to install the application. While an installer running with administrative permissions can modify the contents of the MS.cfg file, Adobe considers such use a violation of the user's trust and advises the creator of the installer never to modify the MS.cfg file.
    global Flash Player trust directory
    The administrative user and installation application can register the specified local SWF file as trusted. These SWF files are assigned to trusted local sandboxes. They can interact with any other SWF file or load data from anywhere (remote or local). The file is specified as trusted in the global Flash Player trust directory, the same directory as the mms.cfg file, in the location (specific to the current user) as follows:
    The Windows: the system/Macromed/Flash/FlashPlayerTrust (for example, C:/Windows/system32/Macromed/Flash/FlashPlayerTrust) Mac: App support/Macromedia FlashPlayerTrust (for example,/Library/Application support/Macromedia/FlashPlayerTrust)
    The Flash Player trust directory can contain any number of text files, with each file listing the trusted path on one line. Each path can be a single SWF file, HTML file, or directory. Comment lines start with #. For example, a Flash Player trust profile with the following text indicates that trusted status is granted to all files in the specified directory and all subdirectories: 

    # Trust files in the following directories:
    
C:/Documents and Settings/All Users/Documents/SampleApp

    The path listed in the trust profile should always be the local path or the SMB network path. Any HTTP path in the trust profile will be ignored; Only local files can be trusted.
    to avoid conflicts, specify a filename for each trust profile that corresponds to the installed application, and use the.cfg file extension.
    because developers distribute locally running SWF files by installing the application, you can have the installation application add a configuration file to the global Flash Player trust directory, granting full access to the files to be distributed. The installation application must be run by a user with administrative rights. Unlike the MMS.cfg file, the global Flash Player Trust directory is included to enable the installation application to grant trust permissions. Both managing users and installing applications can specify trusted local applications using the Global Flash Player Trust directory.
    after reading this article, it turns out that the project in Flex actually adds the output file from the project to the local trust sandbox. The CFG documentation for Flex was also found in the local directory specified, which does include the output folders for each project. So I also tried to add the directory where the DVF was in to the local trust sandbox. The entire folder path string is written to a text file based on the CFG file format described in the article, and then saved as a CFG file. Put it in the system/Macromed/Flash/FlashPlayerTrust. Then run the DVF again, the error message is gone, and the problem is resolved.
    in retrospect, Flash Player is really getting stricter with security. The current version is so strict even for local runs (the version I used before was 9.0, so long as You set allowScriptAccess to always in HTML). Only a thorough understanding of Flash Player's security mechanisms can help us solve the problem better. However, I use above is the management of user control method to achieve, so it is the highest level of configuration, there may be relatively large security risks, you can also try to use the ordinary user control method to add trust. The article write here, hope to be helpful to everybody.

    ARP – s in win7 (ARP binding under win7)

    1. Want to use arp-s to add static binding MAC and IP address

    2. OS Windows 7 English

    3. (1) prompt The ARP entry addition failed: The requested operation requires elevation

    solution, use the administrator identity to run cmd.exe

    4.(2) arp-s, still error.

    prompt: The ARP entry addition failed: Access is denied

    reason: win 7 does not support binding to an existing arp address, that is, the ip-mac you want to add already exists in the arp table.

    5. In win7 to achieve the binding according to the following operation

    (1) using netsh I I show in

    C:/Windows/system32 & gt; netsh i i show in

    (2) view the idx

    of the network card being used

    independence Idx Met MTU State Name
    — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
    1 50 4294967295 connected Loopback The Pseudo – Interface 1
    13 25 1500 connected Wireless Network Connection
    11 May 1500 disconnected Local Area Connection

    (2) use the command (where 13 is the idx of the network card being used)

    note the space bar, each symbol is followed by a space

    C:/Windows/system32> Nesh-c “I I” add neighbors 13 “192.168.0.1” “00-22-b0-f8-0
    d-6e”

    (3) using arp-a

    to see if

    is successful

    C:/Windows/system32 & gt; arp -a

    Interface: 192.168.0.99-0 xd
    Internet Address Physical Address Type
    192.168.0.1 00-22 – b0 – f8-0-6 d e static

    type static


    6. Use netsh I I reset

    is cancelled. Restart is required to take effect