Tag Archives: PLC

[Solved] TwinCAT3 Error: Ads error: 4115 (0x1013, RTIME: system clock setup fails. 

Error 15 27/01/2015 23:23:48 551 ms | 'TwinCAT System' (10000): Sending ams command >> Init4\RTime: Start Interrupt: Ticker started >> Ads error: 4115 (0x1013, RTIME: system clock setup fails.

Hint: On Windows8 system execute win8settick.bat in TwinCAT\3.1\System as administrator and reboot.) << failed!

 

Solution: Go to TwinCaT folder in C drive, TwinCaT>3.1>system, run win8settick.bat as administrator, and restart the computer.

Note: if the same error is reported after restart, run it several times and restart. That’s how I restarted it twice.

Solution of insufficient memory space or desktop stack in GX works2

Solution of insufficient memory space or desktop stack in GX works2

Open Mitsubishi PLC programming software GX works2 prompt

There is not enough memory space or desktop stack to start GX works2
Please restart GX works2 after finishing other applications

New on December 30, 2018, shared by @ Oops. You can delete the registry and reload it.
The method is as follows

    press win + R , enter regedit , and press enter to find HKEY_ CURRENT_ Right click to delete. Reload the software.

Solutions that cannot be opened

Google and Baidu have found many similar situations, but there is no perfect solution

For example, reloading software still doesn't work. It's also said that the cost of reloading the system is too high. After all, a lot of software has to be installed.

#Solution:

##1. First install GX works3
?2. Then install GX works2. Perfectly solve this problem
?3. Pay attention not to unload GX3, otherwise GX2 still can't work.

I thought the GX3 version was high and good, but later I learned that 2 and 3 only support different PLC. The FX2N and gxworks2 that I wanted to use were available, so I unloaded 3. As a result, 2 is not available. Later in accordance with the previous way to try, and good..

Hope to help you