background
RedHat Linux 6.5
DB2 10.5.10
Install DB2 purescale and check the installation requirements through db2prereqcheck, but an error is reported when executing db2_install installation:
[rootserver_t]# ./db2_install
DBI1324W Support of the db2_install command is deprecated.
Default directory for installation of products - /opt/ibm/db2/V10.5
***********************************************************
Install into default directory (/opt/ibm/db2/V10.5) ? [yes/no]
yes
Specify one of the following keywords to install DB2 products.
SERVER
CONSV
EXP
CLIENT
RTCL
Enter "help" to redisplay product names.
Enter "quit" to exit.
***********************************************************
SERVER
***********************************************************
Do you want to install the DB2 pureScale Feature? [yes/no]
yes
DB2 installation is being initialized.
Total number of tasks to be performed: 53
Total estimated time for all tasks to be performed: 2201 second(s)
Task #1 start
Description: Checking license agreement acceptance
Estimated time 1 second(s)
Task #1 end
省略部分...
Task #47 start
Description: Installing or updating DB2 SSH Utilities
Estimated time 5 second(s)
Task #47 end
Task #48 start
Description: Compiling GPL
Estimated time 30 second(s)
Task #48 end
A major error occurred while installing "DB2 Server Edition " on this
computer. The installation cannot continue. If the problem persists contact
your technical service representative.
For more information see the DB2 installation log at
"/tmp/db2_install.log.38995".Solution
Check /tmp/db2_install.log.38995 log according to the prompt
[root@cf1 server_t]# cat /tmp/db2_install.log.38995
...
ERROR: An error occurred while compiling IBM General Parallel File System
(GPFS) Portability Layer (GPL) on host "cf1". Return code "3". GPL compilation
log file location "/tmp/compileGPL.log.000". The GPFS file system cannot be
mounted properly until the GPL module is successfully compiled on this host.
For details, see the specified GPL compilation log. After fixing the problems
shown in the log file, re-run the DB2 installer. For information regarding the
GPFS GPL module compile, see DB2 Information Center.
Compiling GPL :.......Failure
ERROR: A major error occurred while installing "DB2 Server Edition " on this
computer. The installation cannot continue. If the problem persists contact
your technical service representative.
...
Reference: https://www.ibm.com/support/pages/purescale-installation-failed-compiling-ibm-general-parallel-file-system-gpfs-portability-layer-gpl, it should be caused by the kernel version problem.
Check the current system kernel version, the operating system kernel version is 2.6.32-754.35
[root@cf1]# uname -r
2.6.32-754.35.1.el6.x86_64
Check the installed kernel and find that kernel-2.6.32-431.el6.x86_64 is inconsistent with the kernel version of the operating system
[root@cf1]# rpm -qa | grep kerne
abrt-addon-kerneloops-2.0.8-44.el6.centos.x86_64
kernel-headers-2.6.32-754.35.1.el6.x86_64
dracut-kernel-004-411.el6.noarch
kernel-firmware-2.6.32-754.35.1.el6.noarch
kernel-devel-2.6.32-754.35.1.el6.x86_64
kernel-2.6.32-431.el6.x86_64
kernel-2.6.32-754.35.1.el6.x86_64
libreport-plugin-kerneloops-2.0.9-34.el6.centos.x86_64
uninstall kernel-2.6.32-431.el6.x86_64
[root@cf1]# yum remove -y kernel-2.6.32-431.el6.x86_64
Re-execute db2_install to successfully install db2 purescale
[root@cf1]# ./db2_install
DBI1324W Support of the db2_install command is deprecated.
Default directory for installation of products - /opt/ibm/db2/V10.5
***********************************************************
Install into default directory (/opt/ibm/db2/V10.5) ? [yes/no]
yes
Specify one of the following keywords to install DB2 products.
SERVER
CONSV
EXP
CLIENT
RTCL
Enter "help" to redisplay product names.
Enter "quit" to exit.
***********************************************************
SERVER
***********************************************************
Do you want to install the DB2 pureScale Feature? [yes/no]
yes
DB2 installation is being initialized.
Total number of tasks to be performed: 9
Total estimated time for all tasks to be performed: 150 second(s)
Task #1 start
Description: Installing or updating DB2 HA scripts for IBM Tivoli System Automation for Multiplatforms (Tivoli SA MP)
Estimated time 40 second(s)
Task #1 end
Task #2 start
Description: Compiling GPL
Estimated time 30 second(s)
Task #2 end
Task #3 start
Description: Executing control tasks
Estimated time 20 second(s)
Task #3 end
Task #4 start
Description: Updating global registry
Estimated time 20 second(s)
Task #4 end
Task #5 start
Description: Updating the db2ls and db2greg link
Estimated time 1 second(s)
Task #5 end
Task #6 start
Description: Setting default global profile registry variables
Estimated time 1 second(s)
Task #6 end
Task #7 start
Description: Initializing instance list
Estimated time 5 second(s)
Task #7 end
Task #8 start
Description: Registering DB2 Update Service
Estimated time 30 second(s)
Task #8 end
Task #9 start
Description: Updating global profile registry
Estimated time 3 second(s)
Task #9 end
The execution completed successfully.
For more information see the DB2 installation log at
"/tmp/db2_install.log.87073".Refer to the official solution: https://www.ibm.com/support/pages/purescale-installation-failed-compiling-ibm-general-parallel-file-system-gpfs-portability-layer-gpl
Read More:
- There is no error when compiling and packaging the IDEA code, but the code displays an error
- Eclipse Install Hibernate Error: An internal error occurred during: “Initializing Eclipse Error Reporting System
- [Solved] Unity3d reports an error using the opencv plug-in: unsafe code may only appear if compiling with/unsafe.
- Error: an error occurred while performing the step: “building kernel modules”. See/var/log/NV
- [Solved] Faceswap Error: CRITICAL An unexpected crash has occurred.You MUST provide this file if seeking assistan
- Ranger Install Error: [E] ranger_core_db_mysql.sql file import failed!
- The Ajax return value reports an error, and the spring boot development Ajax return value reports an error
- [Solved] Clickhouse Error: DB::Exception: Cannot lock file /var/lib/clickhouse/status
- [Solved] Error while processing statement: FAILED: Execution Error, return code 3 from org.apache.
- How to Solve Maven Error: Return code is: 501 , ReasonPhrase:HTTPS Required.
- android remount of /system failed: Read-only file system [How to Solve]
- [Solved] Mac Install mongodb error: NonExistentPath: Data directory /data/db not found.
- [Solved] Hive Error: FAILED: Execution Error, return code 3 from org.apache.hadoop.hive.ql.exec.mr.MapredLocalTask
- Redis Error: HandleServiceCommands: system error caught. error code=1056, message = StartService failed:
- [Android Error] java.lang.RuntimeException: An error occurred while executing doInBackground()
- Keras Concatenate error: Layer concatenate_1 was called with an input that isn’t a symbolic tensor…
- HIVE Error: Error: Error while processing statement: FAILED: Execution Error, return code 2 from org.apac
- [Solved] HiveSQL Error: “Error while processing statement: FAILED: Execution Error, return code 2“
- NVM ERROR open \settings.txt: The system cannot find the file specified